Brown English Bridle Leather Garrison Belt (1.5 inch, 38 mm wide)
The 1.5" wide leather belt is constructed from 9 oz traditional English Bridle leather from J & E Sedgwick’s in Walsall, UK. The leather is hand finished with a layer of wax on top, also known as "bloom", that could be buffed into the leather or left as is to give it a unique aging look. The belt features solid brass hardware, a classic rectangle garrison buckle and brass Chicago screws.
We pay attention to the slightest details, the edges of the belt is beveled and hand burnished with natural beeswax to achieve a smooth and glossy edge finish. With occasional maintenance, this would be the last belt you would ever need.
Each belt is made with 5 belt holes, each 1 inch apart. We offer teardrop or round holes.
Sizing Guide (PLEASE READ!!!)
The size of the belt is measured from the middle hole to where the leather folds over the buckle, with a total of 5 holes each an inch apart. Please read the following instructions and double confirm your belt size. We will not be responsible for any measurement mistakes.
The most accurate way in determining the belt size is to measure the size of your current belt. Measure the distance from where the leather folds over the buckle all the way down to the most often used belt hole. If the distance measures 36 inches, you should order a 36-inch belt.
Measure your waist (where your pants would sit) with a tape measure. You should choose a belt about 2 inches larger than your exact measurements. For example, if your measurement was 34 inches, you should consider buying a 36-inch belt.
About the leather:
J&E Sedgwick’s traditional bridle leather is each is hand finished with a layer of wax of the leather. The leather had a very smooth grain with minimal marks on it. It's also available in a variety of colors, please contact me for availability if you would like other colors.
If you have any questions, feel free to ask.