5 COLORS - Natural Vegetable-tanned Leather Standard Belt (1.5 inch, 38 mm wide)

The 1.5" wide leather belt is constructed from 10 oz heavyweight Italian vegetable-tanned leather. The item features a solid brass hardware and brass Chicago screws. In many occasions, the leather keeper is a weak spot of a belt. With the brass keeper on this belt, it would surely be the last belt you would ever need.

We pay attention to the slightest details, the edges of the belt is beveled and hand burnished with natural beeswax to achieve a smooth and glossy edge finish. With occasional maintenance, this would be the last belt you would ever need.

Belt Holes
Each belt is made with 5 belt holes, each 1 inch apart. By default, the belt holes on this belt are teardrop shaped, but round holes are available upon request. Please leave a note during checkout if you would like round holes.

Sizing Guide (PLEASE READ!!!)
The size of the belt is measured from the middle hole to where the leather folds over the buckle, with a total of 5 holes each an inch apart. Please read the following instructions and double confirm your belt size. We will not be responsible for any measurement mistakes.

The most accurate way in determining the belt size is to measure the size of your current belt. Measure the distance from where the leather folds over the buckle all the way down to the most often used belt hole. If the distance measures 36 inches, you should order a 36-inch belt.

OR

Measure your waist (where your pants would sit) with a tape measure. You should choose a belt about 2 inches larger than your exact measurements. For example, if your measurement was 34 inches, you should consider buying a 36-inch belt.

If you have any questions, feel free to ask.